Category: Water Filter News

Posted on by

Government Sales Experience

Filter Pure has provided high quality products and exceptional, knowledgeable service to customers in a wide variety of industries for over 30 years. One of those industries is our Federal Government. Our specialist in this department is Amy Easter, who is flexible and responsive to our customers’ unique requirements.

Our extensive line of quality products and competitive pricing make us the first choice for our customers’ filtration needs. Our Federal Government customers include US Army, US Navy, US Coast Guard, Veterans Administration, US Special Operations Command, AAFES, and several other military installations. We also provide to State and Local Governments as well.

We are registered in SAM with cage code 32YK1. Our NAICS and FSC Codes are as follows:

221310: Water Supply and Irrigation Systems 333318: Other Commercial and Service Industry Machinery Manufacturing 333911: Pump and Pumping Equipment 4110: Refrigeration Equipment 4610: Water Purification Equipment 4710: Pipe, Tube and Rigid Tubing 4730: Hose, Tube, Lubrication, and Railing Fittings 4820: Valves, Non-powered 4330: Centrifugal, Separators, and Pressure and Vacuum Filters

We are proud to assist our Federal Government in all their water filtration needs. If you are affiliated with the government and want more information on how we can help you, please contact Amy Easter, Amy@filterpure.com, at 800-942-7873. Or submit your question below.

Get our Newsletter!

Ask us a question!

Posted on by

How Filtration Can Go Wrong

A couple years ago, a luxury hotel had attempted to filter their entire water supply. Their desire was to provide their guest with the best experience possible.  While with good intentions this also gave way to some negative consequences.  Understanding what to remove and what to leave in your water supply can affect not just the taste and odor of the water, but the safety of the water as well.  This particular facility had wanted to remove all the chlorine from their incoming water supply and made the decision to utilize a whole building system to do so.  The side effect of removing all antibacterial properties in a large water system is the introduction of bacterial growth after the point of entry system.  This bacteria growth will occur in the piping after the filtration system and will cause exposure to the user’s downstream. What Filter Pure would have recommended was utilizing a mechanical filtered system with Ultraviolet at the point of entry. This would eliminate any possible contaminants entry into the building water supply.  It also maintains the appropriate levels of disinfectant to ensure pipes are not permitting bacterial growth. For taste and odor concern, these should always be handled at the point of use with a system similar to the Insurice Single PF-i2000 system (EV9324-21).  We recommend Everpure for all water point of use systems. Every location has different water quality concerns that require direct and special attention. If you have any questions regarding your facility’s water filtration systems, please contact me, Todd Leach, or our customer service team at 1-800-942-7873. Ask me a questions!

Posted on by

Perfect Crema!

Great Espresso starts with great water. The first thing an operator should do is test their water to find out the hardness. Water hardness is measured in grains per gallon, a grain is (64.8 milligrams) of calcium carbonate dissolved in 1 US gallon of water (3.785412 L). Espresso is 85-96% water and that water is extremely important to drawing out the flavor of those expensive coffee beans.

But what determines the taste of a great tasting espresso? Crema! Crema is the flavorful, aromatic, reddish-brown froth made when air bubbles combine with fine-ground coffee’s soluble oils. The strong presence of crema in an espresso shot indicates a quality, well-ground coffee and a skilled barista (professional coffee maker). Crema, compared to drip coffee, helps give espresso a fuller flavor and longer aftertaste. The key to creating that perfect crema is tailoring the hardness of the water and Pentair/Everpure working directly with Specialty Coffee Operators and Espresso Equipment Manufactures developed working solutions to take care of espresso water regardless of the number of grains of hardness at an operators location.

The ESO7, 9607-25 (ESO stands for Espresso, the 7 just means the size of the filter cartridge) is a three-in-one system providing filtration, scale prevention and buffering/softening of  the water. The water retains enough mineral to bring out the espresso flavors. The ESO7 will take care of up to 5,300 grains of hardness or at 8 grains of hardness will generate 511 gallons of espresso before it will need to be changed. Need more capacity than that and more ability to work with the hardness of the water you want for your espresso?

The Claris XXL, 4339-14, unit will give you the same great 3 in 1 filter but also give you the ability to generate 2,910 gallons of espresso, (at 10 grains of hardness) but also has an adjustable DUOBLEND™ bypass valve that allows for a more precise adjustment of carbonate hardness. Either system is quick to install, easy to handle and fast to service. Not sure how hard your water is? Confused about what system would help “perfect” your crema? We can help! Call us at 800-942-7873. We are happy to answer all your question.

Click here to ask us a question!

Posted on by

The Worst Drinking Water in America

Ever wonder how bad your city’s drinking water is? Well we have a list of the top 10 cities in America with the WORST drinking water! Is your city listed?

10. Jacksonville, Fla. (JEA) 9. San Diego (San Diego Water Department) 8. North Las Vegas (City of North Las Vegas Utilities Department) 7. Omaha (Metropolitan Utilities District) 6. Houston (City of Houston Public Works) 5. Reno (Truckee Meadows Water Authority) 4. Riverside County, Calif. (Eastern Municipal Water District) 3. Las Vegas (Las Vegas Valley Water District) 2. Riverside, Calif. (City of Riverside Public Utilities) 1. Pensacola, Fla. (Emerald Coast Water Utility)  In many cases, cities meet all federal standards for drinking water quality and yet still distribute harmful contaminants to their customers. The only way you can be certain you are drinking healthy water is to be proactive. This means looking at your local water report or getting a water test done. And you know who to call for a water test, Filter Pure! We are here and ready to help. So, if you are concerned about your city’s water, just give us a call at 800-942-7873. We’ll make sure you have nothing to worry about. Let us know your questions and concerns by clicking the link below. Remember, even if your city has the worst water (residents of Pensacola) we have the knowledge and the means to help! Let us know how we can help!

Posted on by

What Does the NSF Label on My Pentair/Everpure Water Filter Mean?

 Millions of people take the safety of their food, water and consumer products for granted on a daily basis. Why? Because of three letters: NSF. Founded in 1944 as the National Sanitation Foundation, the foundation changed it’s name to NSF International in 1990 as they expanded services beyond sanitation and into global markets. NSF certification is your key to making sure that the products you use meet strict standards for public health protection. Choosing a product certified by NSF lets you know the company complies with strict standards and procedures imposed by NSF.

There are important reasons to look for NSF certification when purchasing a water filter;

  • Performance claims may be based on internal testing only.
  • Sometimes stated capacities are misleading.
  • In capacity claims it’s not always clear what percentage of chemical contaminants are actually reduced.

NSF Certification ensures that:

  • The contaminant reduction claims certified are true and accurate.
  • The materials of construction do not add anything unwanted to the water such as lead.
  • The system is structurally sound.
  • Advertising claims are true and accurate.

From extensive product testing and material analyses to unannounced plant inspections, every aspect of a product’s development is thoroughly evaluated before it can earn our certification. Most importantly, NSF certification is not a one-time event, but involves regular on-site inspections of manufacturing facilities and regular re-testing of products to ensure that they continue to meet the same high standards required to maintain certification over time. If for any reason a product fails to meet one or more certification criteria, NSF will take enforcement actions to protect you, including product recall, public notification or de-certification. If you have any questions about the quality of the filter that you are currently using and whether or not that filter has an NSF certification please ask us about your filter  below or call our team at 800-942-7873.

Posted on by

Water Hazards in Building Systems

NSF pushes forward with Hazard Analysis and Critical Control Point (HACCP) training to reduce risk of microbial, chemical and physicals hazards in building water systems.   

Every year, tens of thousands of preventable injuries and deaths are caused by exposure to microbial, chemical, and physical hazards from building water systems. Utilizing HACCP guidelines to building water systems builds a framework for identifying potential hazards and specifies measures for control to ensure building’s water supply safety. HACCP is a program that provides the necessary training to understand best practices procedure for maintaining a facility water supply.  Filter Pure Systems supports the continued focus by NSF to provide guidelines to promote safe and healthy water.

When working with our Healthcare facilities, we verify with them the level of NSF certification needed by water systems to remove designated contaminants.  NSF 42 certification for water filtration covers systems designed to reduce Aesthetic or non-health related contaminants.  These contaminants include chlorine, taste and odor, and particulates that may be present in public and private drinking water. In the water supply for a hospital, this is not enough protection for the immunocompromised patients.  We recommend utilizing NSF 53 standards at point of use sources for patients that may be susceptible to microbiological exposure. NSF 53 systems are certified to reduce specific health-related contaminants. These contaminants may be microbiological (including cyst and legionella), chemical (including disinfection byproducts, pesticides, herbicides, and insecticides), and particulates.  The first step, we take in securing the quality of our Healthcare facility is to ensure we have a solid foundation of filtration to protect the staff and patients. Using the industry-leading brand Everpure allows us the flexibility to meet the needs of our clients without sacrificing quality or reliability. Let us help you establish a guideline of how to secure the quality of your water from Point of Use to Point of Entry systems.  To view more information on the HACCP training program, please visit nsf.org. For more information or to discuss your current water filtration system, please contact our Health Care & Lodging Specialist, Todd Leach. Click here to ask us a question!

Posted on by

Keeping our Soldiers Safe

For over 30 years, Filter Pure Systems has been keeping our soldiers safe by keeping their drinking water SAFE, especially our boys on the seas. Did you know that a survey was done to determine the risk of contaminated drinking water aboard eleven different US Naval ships? The findings showed that every ship had a moderate risk of chemical contamination in production, storage and distribution systems. This was due to volatile organic compounds, total petroleum hydrocarbons, disinfection by-products and lead.

The U.S. Navy has recognized Everpure Bromination as the safest, most reliable and easy to use method of water disinfection aboard their ships and Filter Pure Systems is proud to provide them with those systems. Bromination was first registered for use in 1976, treating potable water by using polybrominated ion exchange resin. Bromine is a natural occurring element that is found as bromide in living organisms and is a common component in seawater. A large portion of onboard and offshore illness can be caused by this. 

The revolutionary bromine-based systems provide an excellent alternative to chlorine, while de-chlorination systems can be retrofitted to bring cleaner taste to pre-chlorinated water. Ideal for ships of any size, or even off-shore platforms, our Everpure Marine bromination systems won’t corrode filtration equipment like chlorine can. 

Chlorine also carries a fire hazard safety warning and bromine does not. The bromine cartridges hold the polybromide resin, which is non-toxic, and more importantly, non-flammable. Everpure’s de-chlorination systems can also be retrofitted to work with existing chlorination systems, removing the unpleasant taste and smell of chlorine.

Remember, water is the fuel for the United State’s most important military weapon, our Soldiers! So it is a priority to make sure their water is fresh, clean, and most importantly, SAFE!  To learn more about Everpure Marine water filters, contact Filter Pure Systems, Inc. today. We work closely with distributors and customers to ensure that they get the best water filter systems for their needs. Whether you need quick-change cartridges — or a completely new bromination system — Filter Pure Systems, Inc. is here to help! Contact us online or reach Customer Service at 1-800-942-7873.

Posted on by

How Often Do I Change My Water Filter?

One of the most common questions we hear from our customers is in regards to how frequently a water filter cartridge should be changed. Whether it’s a standard sediment or carbon filter, every customer has one key priority in mind: How Long Will I Have Dependably Clean, Great Tasting Water? In other words, how can I be sure that my filter is still reducing the impurities that can impact the flavor of my water? Our standard answer: It depends. The frequency of filter changes depends upon your water quality and your water usage. For example, if there are a lot of sediment particulates in your water, then you will have to change your filters more frequently than someone with little to no sediment. If you are a large restaurant consuming large amounts of water a minute or a hospital with large ice machines, then your usage will demand more frequent filter changes. Having said that, we suggest replacement schedules that are generally as follows: Everpure High Flow CRS Quad MC2 System The most common Everpure Filtration System, mainly seen in the back of the house of restaurants should be changed every 6 months, or every 36,000 gallons. The EC210 prefilter, to the left of the MC2 filters, should be changed more frequently to extend the life of the MC2 filters. We recommend every 3-4 months.       Insurice Triple PF i4000(2) System w/ 20″ Prefilter For water filtration on ice machines, sometimes it can be difficult knowing when to change the filters, especially if you see no difference in the ice. But even if the ice is fine, deep inside the machine inches of scale can be forming and ruining your machine. That’s why it is important to keep a filter change out schedule. We recommend every 6 months or however many gallons are specified on the water filters. For the system pictured to the left, the Insurice Triple PF i4000(2), change those filters every 36,000 gallons of use. Again, changing the prefilter will give your primary cartridges longer life. You should also replace your water filters whenever you notice a decline in performance, whether it is a drop in flow rate and/or pressure, or an unusual taste in the water. You should also, per the CDC, replace your water filter after any boil water advisory alert is lifted in your area. Remember: taste and odor may tip you off to the presence of chlorine in your water, but most contaminants are tasteless and odorless. For the benefit of our customers, we have set-up automatic electronic reminders that are sent when we see that their filters are due to be replaced, based on order history.  We can even set-up Auto-Ship for customers that know they will need water filters by a certain date, but may not remember to place an order. If you have a water filter or filter model not included in the list above, and have a question regarding how often you should replace your filter, I invite you to submit a question below or call our team at 1-800-942-7873. Click here to ask us a question!

Posted on by

Hydrotech teams up with Filter Pure

A new Hydrotech warehouse is now open, HERE at our Filter Pure Systems headquarters! We are stocking Hydrotech’s best selling products – softeners, filters, valves and repair parts and of course, a knowledgeable staff to assist you! Hydrotech is using our warehouse as the primary shipping location for many regional customers, better serving their needs. WaterGroup’s customer service team will arrange local pickups at the customer’s request and will automatically route regional customer orders to the best WaterGroup warehouse location depending upon stock and availability. We are proud to team up with Hydrotech and use our warehouse for their stocking and shipping needs.

Posted on by

Water Filtration System in a Straw

LifeStraw makes previously contaminated water drinkable by removing bacteria and viruses. Sometimes, it’s the simplest technologies that have the greatest potential impact on people’s lives. Take the Vestergaard Frandsen Group’s mobile personal filtration system, otherwise known as LifeStraw. It is a powder-blue plastic tube—much thicker than an ordinary straw—containing filters that make water teeming with typhoid-,cholera- and diarrhea-causing microorganisms drinkable. Now, to be clear, we do not sell this item…yet. We just love to report what’s going on out there in the water purification world. The filters, made up of a halogenated resin, kill nearly 100 percent of bacteria and nearly 99 percent of the viruses that pass through LifeStraw. A University of North Carolina at Chapel Hill evaluation tested the device’s performance in water containing Escherichia coli B and Enterococcus faecalisbacteria and the MS2 coliphage virus as well as iodine and silver. The results indicated that LifeStraw filtered out all contaminants to levels where they don’t pose a health risk to someone drinking the water.
But the device does not filter heavy metals such as iron or fluoride nor does it remove parasites like cryptosporidium or giardia, although the Switzerland-based company’s CEO, Mikkel Vestergaard Frandsen, says there is a version of LifeStraw available to relief groups in Bangladesh and India that can filter arsenic. At less than 10 inches (25 centimeters) long, the device can filter up to 185 gallons (700 liters) of water, estimated to be about a year’s supply for one person. The device is no longer usable when its filters become too clogged to pass water through, typically after a year of hard use.
The success of the personal filtration system led Vestergaard Frandsen to introduce earlier this month its LifeStraw Family device, an instant microbiological purifier that provides about 2.6 gallons (10 liters) of safe drinking water in an hour and about 4,000 gallons (15,000 liters) over its life span for a family of six. LifeStraw Family is designed to sieve dirt, parasites, bacteria and viruses, and will be available starting in May. Larry Greenemeier www.scientificamerican.com