Tag: Coconut Carbon

Posted on by

The Best Espresso in Town!

Every single morning before arriving to work, Amy stops by her local Starbucks and orders her usual venti latte. They know her there by name and are happy to send her on her way with her triple espresso shot drink. Amy said that her morning espresso kick starts her day and without it, well, you would probably find her half asleep at her desk, struggling to focus on her work.

Espresso can be a vital part of someone’s day, like Amy. Did you know that over 55% of the US drink espresso? That percentage is equivalent to 150 million people! That’s A LOT of espresso! 

Did you also know that Espresso is 90% water! It is a key essential ingredient in espresso preparation. So having a water filtration system becomes a must, especially in areas with hard water. Not having filtered water will affect the taste of your espresso as well as the lifespan of your equipment.  So what is the best water filtration system for your espresso machine?   Well, here’s a couple options to consider: The Claris System 5-Stage Filtration Process

  • Pre-filtration
  • Carbonate hardness adjustment
  • Fine filtration
  • Highly efficient carbon block removes harmful contaminant and unpleasant odors and tastes
  • Solid membrane filter removes particles down to 5 micron for highest equipment protection
  • Operates in vertical or horizontal position

 

3 -Stage Blending: Softens, Buffers, and Filters Water
  • Utilizes ion exchange resin with buffering capabilities and high capacity coconut carbon filtration. 
  • A small amount of carbon filtered water bypasses softening resin to allow proper initial hardness. 
  • Buffering prevents water from becoming too acidic. 
  • It also reduces hardness in water that can cause minerals to build-up in espresso equipment. 
  • It also reduces chlorine, off tastes and odors. Cartridge replacement is simple, quick and clean. 
*The QC7I-Twin ESO7 System is pictured to the right.
Depending on your espresso machine and water quality needs, your commercial water filtration system may differ. Give us a call and we’ll be glad to help you in sizing the right system.
Posted on by — 1 Comment

Confused About Carbon?

Confused about which carbon filter to use? Don’t worry! You’re not alone. Here are a few choices when considering which carbon filter to get. Granular Activated Carbon (GAC) cartridges effectively reduce unwanted tastes, odor and chlorine taste & odor from your drinking water. They are designed to allow maximum contact between the water and carbon, ensuring maximum adsorption. The cartridges pictured to the left are the Pentek GAC cartridges. The construction of these cartridges allow water to enter at one end and pass through the entire length of the carbon bed before exiting the other end of the cartridge, while an internal expansion pad minimizes channeling or bypass. Before the water exits the cartridge, a 20-micron post filter helps reduce carbon fines and other suspended particles from the filtered water. The post-filter is permanently fastened to an innovative support basket ensuring that it is firmly secured and eliminating any potential for bypass. GAC Series cartridges are available in a variety of sizes and flow rates, and effectively provide good general-purpose drinking water filtration.     Carbon block cartridges are manufactured using a patented process that yields a cartridge with a nominal 5-micron filtration rating, high dirt-holding capacity. A high porosity design helps prevent the cartridge from plugging before its adsorption capacity is exhausted, maximizing the utilization of the carbon while maintaining low pressure drop. The cartridges pictured to the left are Pentek’s EP carbon block filters. They are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. EP Series cartridges are manufactured entirely from FDA-compliant materials making them an ideal choice for a wide range of residential, food service, commercial and industrial applications.       Coconut based carbon block cartridges are highly effective at reducing unwanted taste & odor and chlorine taste & odor from potable drinking water, and they are equally effective at reducing fine sediment. Coconut based carbon block cartridges are manufactured using a patented process and are made from a water-washed, coconut-carbon formulation. This process and media yield a cartridge with high chlorine taste & odor reduction capacity. The cartridges pictured to the left are Pentek’s CEP-10E and the CCBC-10. They are protected by Endurawrap®, a uniquely formulated polyolefin bilaminate pre-filter, designed to significantly increase the useful life of the cartridge by trapping sediment that typically plugs carbon block cartridges. They are an ideal choice for a wide range of residential, food service, commercial and industrial applications. They also make excellent polishing filters or pre-filters in applications requiring fine filtration and high capacity. For more information about which carbon is best for you, call us at 800-942-7873!