Posted on 1 Comment

Everpure Claris Water Filter Monitor

The Everpure Claris Flow Meter is an Everpure Claris water filter monitor system that was developed to monitor the usage rate of the Claris water filter system. The Claris Flow Meter is used to determine the best cartridge replacement interval for a person’s Claris water filter system by continually measuring the filtrate volume and then calculating the remaining filtration capacity. The Claris flow sensor provides several pieces of information to the user. First, the Claris flow sensor will alert a user when it is time to change the filter cartridge. The Claris Flowmeter will also inform the user of the residual capacity of the installed filter cartridge and the total filtrate volume since the Claris filter monitoring system was installed. Finally, the Everpure Claris flowmeter will inform users of the filtrate volume of the previous five installed filter cartridges and the operation time of the previous five installed filter cartridges.


The Everpure Claris water filter monitor system has several specifications that make it one of the best filter monitoring products on the market. The sensor unit has an operating pressure of 2 to 8 bars and a flow rate of 10 to 100. The Claris Flowmeter has a water temperature range of 39 to 86 degree Fahrenheit and an ambient temperature range of 39 degrees to 104 degrees Fahrenheit. The Everpure Claris filter monitor uses a 3/8“ BSP F nut for an in connection and a 3/8“ BSP M for an out connection. The Claris Flow Sensor has dimensions of 3.15″ x 1.81″ x 1.69″ and a horizontal installation is recommended.

Installation Tips

To install the Claris flow sensor system, a person should first decide if they are mounting the product to the wall. In order to mount the system to the wall, a person should first make sure the device is securely mounted and then screw it into place. Once meter is placed, the user must make sure that its shut off valve is installed upstream of the filter. Upon installation, purchasers should review the Installation, Operation & Maintenance Manual for programming and startup information.

1 thought on “Everpure Claris Water Filter Monitor

  1. Hi there! This post could not be written any better! Reading through this post reminds me of my old room mate! He always kept talking about this. I will forward this post to him. Fairly certain he will have a good read. Thanks for sharing!

    Leave a Reply