INLINE STRAINER HOUSINGS
Inline strainers offer a straight-forward solution for filtration concerns. Easy to access and maintain, these types of filters remove numerous contaminants and dirt particulates while simultaneously avoiding system pressure drops. Pentair Industrial manufactures wide array of inline strainer housings which meet the highest of filtration standards. With flow rates of 1 to 1000 g.p.m. and filtration from 2 to 2000 microns, these strainers can be used in almost any application. Pentairs strainers are made with a 3-bolt “easy-access” swing lid, and are finished in a two-part epoxy on carbon steel. Contact Filter Pure Systems for pricing on inline strainer housings for your Pentair Industrial Models 588, S66 and S44.
FEATURES
- Flow rates from 1 to 1,000 gpm (3.8 to 3,785 Lpm)
- 150 and 300 PSI (10.3 and 20.7 bar) pressure ratings
- In-line connections
- Many standard connection sizes
- High dirt load capacity
- 3-bolt swing lid with plated eye nuts
- 300 PSI (20.7 bar) version has slip and blind flange lid
- High capacity basket with positive hold down spring
- Vent, drain and gauge ports
- Each strainer is factory hydro-tested
- Carbon or Stainless Steel construction
- Two-part epoxy finish on carbon steel strainers, inside and outside
- Buna-N lid and basket O-rings
FULL SPECS
