Hydraulic Housings

Hydraulic Cartridge Housings are designed for the removal of particulate from oils and industrial fluids. Our housings accept standard cartridge inner diameters of 2.625 to 3.5 inches (67 to 89mm), outer diameters of 6 or 7 inches (152 or 178 mm) and heights up to 44 inches (1118 mm). Quality construction and design assure clean effluent and protection for all downstream equipment.

FEATURES

  • Flow rates to 120 gpm
  • Carbon or 304 Stainless Steel construction
  • 100 PSI pressure rating at 250˚F
  • Low pressure drop
  • 3-bolt swing lid with eye nuts allows for easy opening and closing
  • Buna-N® lid seal
  • Optional inlet port/drain port
  • Full tie-rod element connections for positive seal
  • Two-inch in-line connection design
  • Two-part epoxy finish on carbon steel vessels

FULL SPECS

hydraulicelement

pdfinfoteal

CONTACT US TODAY FOR MORE INFORMATION!
1-800-942-7873
info@filterpure.comh88single