K-12 Schools & Child Care

Five Outlets. Once Every Five Years.

That’s what the new federal lead rule covers in your school. Everything else is yours to handle — and the deadline to be ready is November 2027.

EverpureAuthorized Everpure Distributor
PentairPentair Platinum Partner
EPAPFAS-Compliant Solutions
NSFNSF/ANSI Certified Products
FlotillaFlorida-Rooted. Nationally Capable.

School drinking water compliance: the short version

Federal compliance date
November 1, 2027 under the Lead and Copper Rule Improvements
What the rule covers
Five outlets per elementary school, once in a five-year cycle. Secondary schools on request
Who is regulated
The community water system, not the district
What Filter First requires
Point-of-use filters certified to NSF/ANSI 53 for lead and NSF/ANSI 42 for particulate, on every consumptive fixture

Last reviewed September 2026 · Flotilla FilterPure

The Federal Rule

What LCRI Does — and What It Leaves to You.

The Lead and Copper Rule Improvements created the first national requirement to test for lead in schools served by public utilities. It is a screening tool, not a clearance.

Facility Sampling rate Outlets sampled
Elementary schools 20% per year, over five years 5
Licensed child care 20% per year, over five years 2
Secondary schools On request only 5

Your district is not the regulated party. These requirements fall on community water systems. EPA has stated it has no authority to require schools that are not themselves public water systems to comply with these standards. Water systems must submit their list of eligible schools and licensed child care facilities to the state by November 1, 2027 — which is when most districts will first hear about any of this.

And the coverage is deliberately narrow. Utilities are not required to test all taps used for consumption, and each facility is sampled once in a five-year cycle with testing by request afterward. Utilities themselves say that schools and districts are expected to arrange larger-scale testing at their own cost. The action level also stayed at 15 ppb, which is a trigger for action, not a health-based safety threshold.

Check This First

Is Your School on Its Own Well?

If so, the rules above do not apply to you — and your obligations are considerably larger, not smaller.

Commonly Missed

A School on a Well Is a Public Water System

A school served by its own well is a non-transient non-community water system, which is a regulated public water system under the Safe Drinking Water Act. LCRI's school sampling provisions exclude these systems specifically because they are already required to take other actions under the rule to address lead directly.

That means the district carries full public water system obligations in its own name: Lead and Copper Rule compliance as the operator, the federal PFAS limits, routine monitoring and reporting, public notification, and Consumer Confidence Reports.

Rural districts, many private and parochial schools, and independent schools commonly fall here — and the responsible party is often a facilities director who has never been told they operate a public water system.

State Mandates

Filter First: Where Filtration Became the Law.

Michigan passed Filter First in October 2023, becoming the first state to require water filters in schools and licensed childcare centers. Rather than wait for infrastructure replacement, the approach installs certified lead-reducing filters at the outlets people actually drink from.

What must be installed

  • Point of use, not point of entry — at the fixture where water is consumed
  • Certified to NSF/ANSI 53 for lead and NSF/ANSI 42 for particulate
  • On every consumptive fixture
  • Filtered bottle filling stations, faucet-mounted filters, or retrofit kits for existing fountains
  • At least one filtered bottle filling station per 100 students

Station specifications

  • Filter cartridge replacement status indicator — a light or equivalent device
  • Flow rate through the station paired to the cartridge's specified flow rate
  • Station certified to NSF/ANSI 61
  • Designed to fill personal bottles and containers
  • Includes a drinking fountain

Ongoing obligations

  • Annual lead sampling at all filtered stations and faucets — schools
  • Every two years — childcare centers
  • Samples drawn after a stagnation period, analyzed by a certified lab
  • Signage on every unfiltered or shut-off fixture
  • A documented plan, updated at least every five years and public on request

Not yet law in your state? Plumbing Manufacturers International has been testifying to legislators in other states that NSF/ANSI 53-certified point-of-use filters reduce lead exposure cost-effectively regardless of a building's age or plumbing configuration. Several states have begun acting and more legislation appears to be coming. A district specifying to the Michigan requirements today does not have to retrofit later.

Site Walk

Your School Is a Water Map.

Lead rules do not apply to a district. They apply to outlets — and the federal rule covers five of them, once every five years. Follow the water from the service line to every fixture a child actually drinks from.

Swipe to explore →

Filtered water to consumptive fixtures Domestic hot water Highest risk

Follow the Water

Select a point on the plan to open it, or expand any below.

Point 1 — Highest Risk

Service Entry & Lead Service Line

Lead and Copper Rule Improvements SDWA NSF/ANSI 372
  • Backflow protection at the building, rated to hazard, with a current test record
  • Where a lead service line exists it contributes the greatest share of lead at the tap. Replace it before drawing conclusions from fixture sampling — otherwise every result is really a service line result
  • Under LCRI, community water systems sample five outlets per elementary school, once in a five-year cycle. Secondary schools only on request. Compliance date is November 1, 2027
  • Your district is not the regulated party. EPA has said it lacks authority to require schools that are not themselves public water systems to comply with these standards
  • On your own well? Then you are a non-transient non-community water system — a regulated public water system in your own name, carrying Lead and Copper and PFAS obligations directly
Point 2 — Hot Water Plant

Water Heaters & Softeners

NSF/ANSI 44 Manufacturer spec
  • Softening at the main is the one true point-of-entry product — it protects the water heater, dish machine and booster heater across the whole building
  • Reverse osmosis does not belong here. Permeate is aggressive toward copper, brass and solder, and strips the disinfectant residual protecting every downstream branch
  • Temperature matters even where Legionella is not the headline risk: storage and recirculation above 122°F, tempered by mixing valves, never above 120°F at a fixture children can reach
  • Summer shutdown is a plant event as much as a plumbing one. Setting back hot water for ten weeks changes what is living in the tank
Point 3 — Treatment

Central Filtration

NSF/ANSI 53 NSF/ANSI 42 NSF/ANSI 61
  • Central filtration supplements point-of-use protection; under a Filter First-style rule it does not replace it
  • Filter First requires point of use, not point of entry. Filters must sit at the fixture where water is consumed — a central system alone will not satisfy the statute
  • Where central treatment earns its place is upstream conditioning: sediment, chlorine and chloramine, and scale control feeding the kitchen and the hydration stations
  • Chloramine needs a different carbon specification than free chlorine, and is frequently missed at spec
Point 4 — Where the Mandate Lands

Hydration Stations

NSF/ANSI 53 NSF/ANSI 42 NSF/ANSI 61
  • Michigan's Filter First law requires filters certified to NSF/ANSI 53 for lead and NSF/ANSI 42 for particulate on every consumptive fixture, installed at the point of use
  • A filter cartridge replacement status indicator is required — a light or equivalent device — and the station's flow rate must be paired to the cartridge's specified flow rate
  • Station certified to NSF/ANSI 61, designed to fill personal bottles, and including a drinking fountain
  • At least one filtered bottle-filling station per 100 students
  • The cartridge is where compliance fails. A station can carry a broad NSF/ANSI 53 listing while the replacement sold for it is certified only to 42 for chlorine, taste and odour. Install that and the district is out of compliance with nobody noticing
  • Annual lead sampling at all filtered stations and faucets, after a stagnation period, through a certified laboratory
Point 5 — Consumptive Fixtures

Classroom Sinks

NSF/ANSI 53 Filter First
  • Every fixture used for drinking or food preparation is a consumptive fixture and needs filtration under a Filter First-style rule
  • Designate which fixtures are consumptive and which are not, then sign the ones you are not filtering as not for drinking — bathroom sinks, mop basins, and art room sinks
  • Do the plumbing inventory once, keep it current, and use it for everything downstream: sampling plan, filter schedule, budget
  • A classroom sink used all day is not the problem. The one in the room that has been a storage closet for two years is
Point 6 — Oldest Fixtures

Corridor & Gym Fountains

NSF/ANSI 53 Filter First
  • Legacy fountains are typically the oldest fixtures in the building and the first place elevated lead shows up
  • Michigan's grant explicitly excluded plain unfiltered drinking fountains from reimbursement. Replace with a filtered station or retrofit — buying an unfiltered fountain means paying twice
  • Retrofit kits for existing fountains are a compliant form where the bowl and plumbing are sound
  • Gym and field-house fountains see heavy seasonal use and then months of nothing. Both patterns matter
Point 7 — Priority Fixtures

Health Office & Staff Room

FDA Food Code NSF/ANSI 53
  • The nurse's office sink is a priority fixture — it is used for medication, wound care and for children who are already unwell
  • Prioritise sampling and filtration here alongside early-grade classrooms and the kitchen
  • Staff room ice machines are food equipment: ice is a food, the waste line needs an air gap, and the filter is a food safety control
  • Medication refrigerators and any water-fed appliance belong in the fixture inventory
Point 8 — Different Rules Apply

Pre-K & Early Childhood

LCRI Filter First State childcare licensing
  • A licensed child care facility is regulated separately from the school around it — under LCRI, utilities sample licensed daycares at two outlets on the same 20%-per-year cycle
  • Under Michigan's law, childcare centres had an earlier deadline than schools and sample every two years rather than annually
  • Young children are the population most harmed by lead, which is why federal rules prioritise elementary and childcare over secondary schools
  • Child-height fixtures and low bottle fillers still need the same NSF/ANSI 53 and 42 certification
  • If your district operates a licensed centre, check whether it qualifies for state testing programmes the rest of your buildings do not
Point 9 — Food Safety

Kitchen: Dish, Prep & Steam

FDA Food Code NSF/ANSI 3 ASSE 1013
  • School kitchens fall under the Food Code as adopted locally: potable water from an approved source, no submerged inlets, backflow prevention throughout
  • Air gap above the flood level rim at sink faucets and pot fillers; air-gapped waste on prep sinks and steam equipment
  • RPZ or air gap at the mop sink — cleaning chemicals make it a high-hazard cross-connection, and a hose left submerged is the single most commonly written-up condition
  • Hardness drives spotting, detergent consumption and booster heater life. The manufacturer's spec governs because that is what the warranty references
  • Summer closure leaves the whole kitchen stagnant. Flush before the first service day, on a written procedure
Point 10 — Ice Is a Food

Ice Machine

FDA Food Code NSF/ANSI 12
  • Ice for consumption is a food under the Food Code — the filter is a food safety control, not maintenance
  • Air-gapped waste on the machine and the bin; verified backflow preventer at the inlet
  • Under the 2024 UPC, ice makers also need an air gap or an ASSE 1032/1024 dual check on the supply — a recent change that catches equipment which passed the last inspection
  • Scale drives harvest cycle time, cube clarity and component life. A machine failing in the first hot week of the year is a scale problem that started in March
Point 11 — Service

Serving Line & Milk Cooler

FDA Food Code NSF/ANSI 18
  • Serving line wells, steam tables and beverage equipment all connect to potable water and all need backflow protection appropriate to the hazard
  • Any carbonated beverage dispenser requires an ASSE 1022 vented backflow preventer or an air gap, with no copper downstream
  • Under the 2024 UPC, non-carbonated dispensers including coffee and juice machines need an air gap or ASSE 1032/1024
  • Bottle fillers in the cafeteria count toward the one-per-100-students requirement where a Filter First-style rule applies
Point 12 — Classic Dead Legs

Science Labs, Eyewash & Safety Showers

ANSI/ISEA Z358.1 Local plumbing code
  • Lab eyewash stations and safety showers are the purest dead legs in a school: plumbed for emergency flow, used almost never
  • Manufacturer and ANSI requirements call for periodic flowing, typically weekly, for a set duration or until water runs clear
  • That flush serves water quality as much as functional verification. Most schools log it as a safety check and never count it as a water quality control — which wastes a record they already keep
  • Lab sinks are non-consumptive and should be signed as not for drinking
  • Chemical hazards make lab and art room sinks candidates for backflow protection beyond a simple air gap
Point 13 — Seasonal Stagnation

Locker Room Showers

Local plumbing code ASHRAE 188 (where triggered)
  • A bank of showers used for one sports season and then idle for eight months is a textbook stagnation problem
  • Non-self-draining showerheads hold water for the entire off-season. Consider a policy requiring self-draining heads
  • Flush every shower head and every trough sink before a season starts — not just the mains. Flushing the riser accomplishes nothing if the head still holds August water
  • Record completion by room, date and person. A verbal instruction to the custodian is not a record
  • Where a school has a pool or spa, ASHRAE 188 may be engaged for the building
Point 14 — High Hazard

Custodial & Mop Sinks

ASSE 1013 FDA Food Code
  • RPZ assembly or air gap required — cleaning chemicals make this the highest-hazard cross-connection in the building
  • Never leave a hose attached and submerged. It is the most commonly cited plumbing condition in schools and takes ten seconds to fix
  • Confirm the assembly type matches the hazard rating and that the test record is current
  • Mop sinks are non-consumptive fixtures — sign them, and leave them off the filtration scope

Illustrative layout. Equipment, treatment train and pipe routing vary by site. Local jurisdiction governs — code adoption varies by state, edition and cycle. Confirm with the authority having jurisdiction before relying on this for a specific facility, and verify all certifications by model number at info.nsf.org/Certified/DWTU.

Key Applications

Where a District Actually Has to Act

Filter First and the drinking water rules reach specific outlets, not the whole building. These are the four that carry the obligation — and the certifications each one has to be able to show.

Filtered Bottle-Filling Stations — Lead + cyst feeding Bottle fillerLead + cystBottle filler

Filtered Bottle-Filling Stations

The station must carry NSF/ANSI 53 for lead reduction and NSF/ANSI 42, with a cartridge replacement status indicator and a matched flow rate.

Without it: A station certified for the wrong thing does not satisfy the statute.

Classroom & Fixture Outlets — Point-of-use feeding Fixture / showerPoint-of-useFixture / shower

Classroom & Fixture Outlets

Point of use means at the fixture where water is consumed. Point of entry treatment does not meet a point-of-use requirement.

Without it: Lead is picked up downstream of wherever the building was treated.

Kitchen Ice — Carbon + scale feeding Ice machine + binCarbon + scaleIce machine + bin

Kitchen Ice

Ice is a food under the FDA Food Code and receives no kill step, so what enters the machine is what reaches the student.

Without it: Treatment belongs ahead of the machine; the bin stays a cleaning task.

Cafeteria Steam — Filtration + scale feeding Combi ovenFiltration + scaleCombi oven

Cafeteria Steam

School kitchens compress heavy steam duty into two short service windows a day — which is exactly when downtime is least affordable.

Without it: One train commonly feeds a combi and a steamer. Size for both.

Incoming supplyTreated water

Not sure which of these you have, or what they are costing you? Put the numbers in the water cost calculator.

Around the Building

Three Places Lead Gets In.

Hydration Stations

Filtered Fillers

  • NSF/ANSI 53 for lead, 42 for particulate
  • Cartridge status indicator required under Filter First
  • Flow rate matched to the cartridge
  • One per 100 students under the Michigan standard
  • Replacement cartridge must carry the same certifications
Shop Filling Stations →

Classroom & Corridor

Older Fixtures, Long Weekends

  • Water sits overnight, over weekends, all summer
  • Longer stagnation means more lead dissolved from fixtures and solder
  • Sample after a stagnation period to see the real number
  • Sign every non-consumptive fixture
  • Flush after every break, on a written procedure
Shop Faucet Filters →

Cafeteria

Ice Is a Food

  • School kitchens fall under the FDA Food Code as adopted locally
  • Air-gapped waste on ice machines and prep sinks
  • ASSE 1022 backflow protection on carbonated dispensers
  • No submerged inlets at pot fillers or dipper wells
  • Scale control on dish machines and booster heaters
Foodservice Guide →

The Cartridge Is Where Compliance Fails.

A station can carry a broad NSF/ANSI 53 listing while the replacement cartridge sold for it is certified only to NSF/ANSI 42 for chlorine, taste, and odor. Install that cartridge under a Filter First-style rule and the district is out of compliance with nobody noticing. Every product we list shows its exact standards and claims, and auto-ship keeps the schedule from depending on memory.

K-12 Water Compliance Guide

LCRI timeline, Filter First specifications, funding sources, and a program checklist

Download →

Paying For It

There Is Federal Money For This.

WIIN Act §2107 authorized EPA to fund state programs for voluntary lead testing in schools and child care facilities. Grants are awarded non-competitively to states, territories, and tribes, then administered locally.

Federal funding to date

  • Over $200 million provided since 2018
  • $26 million announced June 2025
  • Over $35 million in projects announced January 2026
  • Administered through your state drinking water agency

What voluntary states look like

  • Florida — DEP Voluntary Lead Testing Program for Schools and Childcare Facilities, WIIN-funded
  • Georgia — Clean Water for Georgia Kids, also voluntary
  • Neither requires filtration — testing is offered, remediation is yours
  • The trigger is a result you didn't expect, not a deadline

Lessons from Michigan's grant

  • $50 million in ARPA funds, now nearly exhausted
  • Covered labor, stations, filters, and universal cartridges
  • Excluded any station or filter not meeting the standards
  • Excluded plain unfiltered drinking fountains entirely
  • Buy non-compliant and you fund it twice

Program Build

Ten Steps for a District.

Worth following whether or not your state mandates it — and the order matters, particularly steps two and three.

  1. Inventory every fixture and designate each as consumptive or non-consumptive.
  2. Identify any lead service line. Replace it before drawing conclusions from fixture samples.
  3. Sample after a stagnation period, through a certified drinking water laboratory.
  4. Prioritize early-grade classrooms, the nurse's office, and the kitchen.
  5. Filter at the point of use, certified to NSF/ANSI 53 and 42.
  6. Sign every fixture you are not filtering.
  7. Assign cartridge replacement to a named person with a calendar.
  8. Re-sample annually — every two years for childcare.
  9. Document the plan and make it available to staff and families.
  10. Flush after every break, on a written procedure with recorded completion.

Specification

Before You Sign the PO.

Nine checks that separate a compliant install from an expensive one you have to do again.

  • Certified to NSF/ANSI 53 for lead reduction — verified by model, not by brand
  • Certified to NSF/ANSI 42 for particulate, Class I
  • Station certified to NSF/ANSI 61
  • NSF/ANSI 372 for lead content in the product's own materials
  • Cartridge replacement status indicator present and functional
  • Flow rate of the station matched to the flow rate of the cartridge
  • Replacement cartridge carries the same certifications as the original
  • Point of use, not point of entry — POE does not satisfy Filter First
  • Listing confirmed at info.nsf.org/Certified/DWTU, or an equivalent WQA or IAPMO listing

State law governs. Filtration mandates exist in a small number of states and are expanding. Testing programs vary between mandatory and voluntary, and adoption is inconsistent. Confirm with your state drinking water agency and local health department before relying on anything here for a specific district.

Federal lead rules have been subject to review. Verify current requirements and dates at epa.gov. Verify all certifications by model number at info.nsf.org/Certified/DWTU. This material is informational and is not legal, engineering, or plumbing advice.

Planning a district-wide install or writing a grant application? Talk to a Filter Pure specialist or apply for a partner account.

Common Questions

Frequently Asked Questions

How many outlets does the federal lead rule test in a school?

Five. Under the Lead and Copper Rule Improvements, community water systems sample five outlets at each elementary school and two at each licensed child care facility, at a rate of 20 percent of facilities per year across a five-year cycle. Secondary schools are tested on request only. Utilities are not required to test every tap used for consumption, so most fixtures in a building are never sampled.

Is my school district responsible for lead testing?

Not under the federal rule. Those requirements fall on community water systems, and EPA has stated it lacks authority to require schools that are not themselves public water systems to comply with these standards. The exception is a school on its own well, which is a non-transient non-community water system and therefore a regulated public water system in its own name, carrying Lead and Copper Rule and PFAS obligations directly.

What does Filter First require in schools?

Michigan’s Filter First law requires point-of-use filters certified to NSF/ANSI 53 for lead reduction and NSF/ANSI 42 for particulate on every consumptive fixture, a filter cartridge replacement status indicator, flow rate paired between station and cartridge, stations certified to NSF/ANSI 61, at least one filtered bottle-filling station per 100 students, annual lead sampling, and signage on fixtures that are not filtered. Point of entry does not satisfy the statute.

Should a lead service line be replaced before testing fixtures?

Yes, where one exists. A lead service line contributes the greatest share of lead at the tap, so fixture sampling done before replacement largely measures the service line rather than the plumbing inside the building.

Sources

Primary Sources

Everything on this page is drawn from the documents below. Where they and this summary disagree, the primary source governs — confirm against it before relying on anything here for a specific facility.