everpure.gif (13791 bytes)

[ Order Now | Request Info ]

Filter Pure Systems, Inc.

Specifications

Specification
Model

Part No. Size1
(L"xW"xD")
Min.
Inlet (OD)
Connec.
Service Flow
Rate
Min2     Max
Pressure
Min     Max
Max
Temp
Typical Applications

QC71-MC Single

9275-01 29 x 8 x 5 3/8" 0.1 gpm 1.67 gpm 10 psi 125 psi 100°F (38°C)

Fountain Dispenser: Single carbonator, less than 25 syrup tanks per month

QC71-MC Twin 9275-02 25 X 12 X 7 3/8" 0.2 gpm 3.34 gpm 10 psi 125 psi 100°F (38°C) Fountain Dispenser: Single carbonator, over 50 syrup tanks per month

QC71-MC Triple

9275-03 25 x 14 x 7 3/8" 0.3 gpm 5.0 gpm 10 psi 125 psi 100°F (38°C) Dbl. carbonator dispensers, over 50 syrup tanks per month

Coldrink
System 1

9328-01 31 x 20 x 7 3/8" 0.1 gpm 1.67 gpm 10 psi 125 psi 100°F (38°C) Fountain Dispensers: Single carbonator, less than 25 syrup tanks per month (backplate)

Coldrink
System 2

9328-02 31 x 23.5 x 7 3/8" 0.2 gpm 3.34 gpm 10 psi 125 psi 100°F (38°C) Fountain Dispenser: Single carbonator, over 50 syrup tanks per month (backplate)

Coldrink
System 3

9328-03 31 x 23.5 x 7 3/8" 0.3 gpm 5.0 gpm 10 psi 125 psi 100°F (38°C) Double carbonator dispensers, over 50 syrup tanks per month (backplate)

High Flow
Water Filter

9337-11 29 x 24 x 9 3/4" 0.4 gpm 7.3 gpm 10 psi 125 psi 100°F (38°C) Post mix dispensers; up to 4 carbonators, 50+ syrup tanks per month

Dual High
Flow Coldrink

9337-22 42 x 36 x 14.5 3/4" 0.4 gpm 13.4 gpm 10 psi 125 psi 100°F (38°C) For multiple, simultaneous applications.  Serves up to 7 machines.

IN-10

9100-06 11.5 x 2 x 2 1/4" 0.1 gpm 0.75 gpm 10 psi 125 psi 100°F (38°C) Low volume, small coffee brewers.

QC4-BH

9272-00 16 x 5 x 5 1/4" 0.15 gpm 0.5 gpm 10 psi 125 psi 100°F (38°C) Low flow, medium volume coffee brewers

QC71-MH

9272-41 29 x 5.5 x 5 3/8" 0.1 gpm 1.67 gpm 10 psi 125 psi 100°F (38°C) Higher flow, higher volume coffee urns

Insurice 2000 Single

9324-01 29 x 7 x 7 3/8" 0.1 gpm 1.67 gpm 10 psi 125 psi 100°F (38°C) Cubers, up to 750 lbs./day
Flakers, up to 1500 lbs./day

Insurice 2000 Twin

9324-02 29 x 11 x 7 3/8" 0.2 gpm 3.34 gpm 10 psi 125 psi 100°F (38°C) Cubers, up to 1450 lbs./day
Flakers, up to 2200 lbs./day

Insurice 4000 Triple

9325-03 29 x 15.5 x 7 3/8" 0.3 gpm 5.0 gpm 10 psi 125 psi 100°F (38°C) Higher volume, higher capacity machines .5 - 5.0 gpm

Insurice 4000 Quad

9325-04 29.5 x 21 x 7 3/8" 0.3 gpm 7.3 gpm 10 psi 125 psi 100°F (38°C) Higher volume, higher capacity machines 7.3 gpm

KleenSteam
AR-X

9797-00 29 x 20 x 6.5 3/8" 0.3 gpm 1.5 gpm 10 psi 125 psi 80°F (27°C) Boiler base steamer less than 1.5 gpm

KleenSteam
CT

9797-50 20.25 x 14.25 x 6.5 3/8" 0.3 gpm 1.0 gpm 10 psi 125 psi 80°F (27°C) Counter top steamers with low flow rates

QC7-DM

9276-01 21 x 5 x 5 3/8" 0.1 gpm 0.1 gpm 10 psi 125 psi 100°F (38°C) Flash steamers, sterilizers and warmers

System CSR - Triple

9330-43 32 x 34 x 8 1/2" 0.3 gpm 5.0 gpm 10 psi 125 psi 100°F (38°C) Dual carbonators, 4-pot coffee brewer and 600 lb. ice maker

High Flow
System CSR

9338-00 33 x 28 x 9 3/4" 0.4 gpm 7.3 gpm 10 psi 125 psi 100°F (38°C) Four carbonators, 4-pot coffee brewer and 1200 lb. ice maker

High Flow
"Plus" System

9347-11 33 x 34 x 9 3/4" 0.4 gpm 7.3 gpm 10 psi 125 psi 100°F (38°C) High volumes, additional capacity
#1 Length includes 2 1/2" clearance necessary for cartridge change.

#2  Precoat filters must be flushed before use by running water through each cartridge (one at a time) for 5 minutes at full flow; high flow 5 minutes total.

#3  Some manufacturers use high quantities of water at high flow rates.  Some locations call for stacked equipment.  Do not exceed the indicated maximum flow rate for each of the filters.  Contact your local distributor for additional sizing information.


All Information Copyright © 1999 by Filter Pure Systems Inc. - All Rights Reserved


Filter Pure Systems, Inc.
5405 Boran Place
Tampa, FL 33610
Ph. 813.626.9600 * Fax.  813-626-4800
E-Mail: info@filterpure.com