puralogo2s.gif (1997 bytes)   Pure As Nature

[ Order Now | Request Info ]

Filter Pure Systems, Inc.

Hydrotech® HT 101 Series
Reverse Osmosis Drinking Water Systems

Home Page

Add On Series

1 GPM Series

2 GPM Series

8 - 10 GPM Series

BigBoy Series

Hydro Tap Drinking
Water Faucet

Optional Accessories

HT103 Series
(3 stage)

HTF101 Series
(4 stage)

CM Series
(Commercial System)

VCM Series
(Industrial System)

 

 

 

HTF 101 Series R.O.

HT 101 Series

The Hydrotech® Reverse Osmosis Drinking Water System combines mechanical filtration with reverse osmosis technology for effective water treatment in point-of-use applications. The system is manufactured using the finest materials available, including NSF® approved plastics. The system is 100% tested and sanitized in preparation for shipment. Hydrotech® Drinking Water Systems are equipped with a patented Smartap® Water Quality Monitor which compares the feed water to the product water to determine membrane performance. The Smartap® Monitor reports the results by illuminating colored lights. The Smartap®  Push Button Monitor is activated at the touch of a button. The Smartap®  Faucet Monitor is actuated with each draw of water from the faucet, in addition, it monitors inlet valve operation. The integrity of this proven, leading edge technology provides the customer with consistent, reliable system performance. The Hydrotech® Reverse Osmosis System is backed by a two year limited waranty. The Smartap® water quality monitor is backed by a five year warranty.
OPTIONS  SELECT MODULE, OUTPUT DESIGNATION, CONTAMINATION CLAIM AND FAUCET TO DETERMINE MODEL NUMBER

Module Configuration

Output   Designation°°

 Chemical - Mechanical Claims Chemical - Mechanical - Nitrate Claims

 WATER QUALITY   MONITOR

   9  15  25 35 45

    PRODUCT WATER FAUCET

       PRODUCT WATER FAUCET
 Pushbutton Smartap®   101 03  04  05 06 07   Chrome   001 Stainless or Polymer   101°    Chrome   003 Stainless or Polymer  103°
 Faucet Smartap®   101 03  04  05 06 07   Chrome   002 Stainless or Polymer   102°    Chrome   004 Stainless or Polymer  104°

 * System tested and certified by NSF International against ANSI/NSF 53 and ANSI/NSF 58 for specific contaminants as listed in the performance data sheet.
 ** Manufacturer's Reference Designation only.  Refer to output Performance table for certified output performance.
 
CHEMICAL REDUCTION PERFORMANCE
Organic and Inorganic Contaminants Influent AVG MG/L Effluent AVG MG/L Average  % REJ 

Effluent    MAX MG/L

Minimum % REJ

   EPA MCL or ACTION    LEVEL mg/L
 Barium (Ba)   10.7    0.15   99%       0.60  94%                     2.0
 Cadmium (Cd)   0.03    0.0005  98%      0.00077  97%                    0.005
 Hexavalent Chromium (Cr)   0.15    0.022  86%      0.049  67%                    0.05
 Trivalent Chromium (Cr)   0.17    0.02  88%      0.02  88%                    0.05
 Copper (Cu)   2.94    0.038  99%      0.074  97%                    0.2
 Flouride (F)   8.22    0.554  93%      1.0  88%                    2.0
 Lead (Pd)   0.146    0.0011  99%      0.0015  99%                   .0015
 Mercury (Hg)   0.006    0.0005  91%      0.0089  86%                    0.002
 Nitrates ~ Nitrites† (N)   7.3    0.685  87%      0.843  86%                    10.0
 Radium 226/228 (Ra)   25pCi/L    5pCi/L  80%      5pCi/L  80%                    5pCi/L
 Selenium (Se)   0.1112    0.0042  96%      0.01  91%                    0.05
 

 † This system is acceptable for treatment of influent concentrations of no more than 27 mg/L nitrate (NO3) and 3 mg/L nitrite (NO2) in combination measured as 7.8 mg/L nitrogen (N) and is certified for nitrate/nitrite reduction in water supplies with a pressure of 280 kPa (40 psig) or greater. This system is not available in California. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in your water. 
 
MECHANICAL FILTRATION PERFORMANCE

Contaminant Reduction

 Influent     AVG MG/L Effluent     AVG MG/L Average  % REJ

Effluent     MAX MG/L

 Minimum % REJ  NSF Requirement % Rejection/MAX NTU
 Asbestos  671 0.347   99.95%       3.7   99.45% 7 million fibers (>10µm) per L
 Cysts 102,938 6.5   99.99%       56   99.95% 99.95% (3-4 micron size)
 Turbidity 19.4 NTU 0.10 NTU   99.95%       0.19 NTU   99% 1.0 NTU
 

 Note: Certification for Cyst Reduction includes Cryptosporidium, Giadia lamblia and Entamoeba. The contaminants or other substances removed by this water treatment device are not necessarily in your water. 
 
OUTPUT PERFORMANCE
Total Dissolved Solids (TDS) Reduction and System Production                                                                                                                Product Water goes to Pressurized Tank 
Model  Number Influent AVG µMHO Effluent AVG µMHO Reject AVG % Effluent MAX µMHO Reject MIN %  Production Rate Recovery Rating ‡
 10103  795  19  98%  24  97% 19 liter/day (5gal/day)  34%
 10104  795  51  94%  74  91% 28 liter/day (5gal/day) 25%
 10105  760  22  97%  28  96% 283 liter/day (5gal/day) 21%
 10106  761  32  96%   44  94% 34 liter/day (5gal/day)  24%
 10107  796  39  95%  58  93% 45 liter/day (5gal/day) 24%
 

 ‡ System has been tested and operates at the specified recovery rating under standard test conditions as specified in the Performance Data Sheet. The recovery system is a percentage measure of the amount of influent water which is delivered as permeate under open permeate discharge conditions. 
 
CONDITIONS FOR SYSTEMS USE
Source Water Supply Profile Chemical Parameters Maximum MG/L

Application Guidelines
Community / Private Chlorinated / Non-Chlorinated Hardness (CaCo3)  <350 This drinking water system is for use on potable water supplies only. 

CAUTION: Do not use this system where the water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the system. 

Source water exceeding Chemical Parameters requires pretreatment.
System       Pressure 280-690 kPa      (4--100 psig) Iron (Fe)   <0.1
Temperature 4°-38° (40°-100°) Manganese (Mn)   <0.5
pH Range 3.0-11.0 Hydrogen Sulfide (H2S)    0.00
Maximum TDS Level 2000 mg/L Residual Chlorine (Cl2)    <2.0
Turbidity   <1.0 NTU °Silt Density Index: Value stated in units. 
Maximum SDl °  <4.0
Warranty:  PURA warrants all new products to be free from defects in material and workmanship.  PURA systems are warrantied for 3 years from the date of purchase except electrical components which are warrantied for 1 year.  Filters are not warrantied due to varying water conditions.
This warranty agreement excludes all products or component parts that, in the opinion of PURA, have been subjected to negligent use, misuse, or alteration, or that have been repaired with component parts other than those manufactured or supplied by PURA.  This warranty gives the buyer specific rights.  These rights vary from state to state.

All Information Copyright © 2001 by Filter Pure Systems Inc. - All Rights Reserved

Filter Pure Systems, Inc.
5405 Boran Place
Tampa, FL 33610
Ph. 813.626.9600 * Fax.  813-626-4800
E-Mail: info@filterpure.com