Pura HT103 Series (3 Stage) - Filter Pure Systems

Pure As Nature

Filter Pure Systems, Inc.

Hydrotech® HT 103 Series
Reverse Osmosis Drinking Water Systems

Home Page Add On Series 1 GPM Series 2 GPM Series 8 - 10 GPM Series BigBoy Series Hydro Tap Drinking Water Faucet Optional Accessories HT103 Series (3 stage) HTF101 Series (4 stage) CM Series (Commercial System) VCM Series (Industrial System)								HT 103 Series The Hydrotech® Reverse Osmosis Drinking Water System combines mechanical filtration with reverse osmosis technology for effective water treatment in point-of-use applications. The system is manufactured using the finest materials available, including NSF® approved plastics. The system is 100% tested and sanitized in preparation for shipment. Hydrotech® Drinking Water Systems are equipped with a patented Smartap® Water Quality Monitor which compares the feed water to the product water to determine membrane performance. The Smartap® Monitor reports the results by illuminating colored lights. The Smartap® Push Button Monitor is activated at the touch of a button. The optional Smartap® Faucet Monitor is actuated with each draw of water from the faucet, in addition, it monitors inlet valve operation. The integrity of this proven, leading edge technology provides the customer with consistent, reliable system performance. The Hydrotch® Reverse Osmosis System is backed by a two year limited warranty. The Smartap® Water Quality Monitor is backed by a five year limited warranty.
	OPTIONS
	Monitor Configuration			Output Designation			All Performance Claims
	Water Quality Monitor			9	15		PRODUCT WATER FAUCET
	Pushbutton Smartap®		103	03	04		Chrome				001	Stainless Steel or Polymer		101°
	Faucet Smartap®		103	03	04		Chrome				002	Stainless Steel or Polymer		102°
	° System tested and certified by NSF International against ANSI/NSF 58 for specific contaminants as listed in the performance data sheet.
	°° Manufacturer's Reference Designation only. Refer to output Performance table for certified performance.

	CHEMICAL REDUCTION PERFORMANCE
	Organic and Inorganic Contaminants				Influent AVG MG/L		Effluent AVG MG/L	Average % REJ	Effluent MAX MG/L		Minimum% REJ	EPA MCL or ACTION LEVEL mg/L
	Barium (Ba)				10.69		0.46	96%	0.78		93%	2.0
	Cadmium (Cd)				0.03		0.002	93%	0.0074		76%	0.005
	Hexavalent Chromium (Cr)				0.154		0.025	84%	0.45		71%	0.05
	Trivalent Chromium (Cr)				0.19		0.02	89%	0.02		89%	0.05
	Copper (Cu)				2.94		0.19	93%	0.41		86%	0.2
	Flouride (F)				8.22		1.14	86%	1.8		78%	0.015
	Lead (Pb)				0.146		0.002	98%	0.005		96%	0.015
	Radium 22.6/228 (Ra)				25pCi/L		5pCi/L	80%	5pCi/L		80%	5pCi/L
	Selenium				0.11		0.005	96%	0.01		91%	0.05
	† This system is acceptable for treatment of influent concentration of no more than 27 mg/L nitrate (NO₃) in combination measured as 7.8 mg/L nitrogen (N) and is certified for nitrate/nitrite reduction in water supplies with a pressure of 280 kPa (40 psig) or greater. This system is not available in California. The contaminants or other substances removed or reduced by this water treatment device are not necessarily in your water.

	MECHANICAL FILTRATION PERFORMANCE
	Contaminant Reduction				Influent AVG MG/L		Effluent AVG MG/L	Average % REJ	Effluent MAX MG/L		Minimum % REJ	NSF Requirement % Rejection/MAX NTU
	Asbestos				647		0.33	99.95%	1.0		99.8%	7 million fibers (>10µm) per L
	Cysts				102,938		3.75	>99.99%	29		99.97%	99.95% _{3-4 micron} _size
	Turbidity				19.4 NTU		0.08 NTU	99.6%	0.15 NTU		99.2%	1.0 NTU
	Note: Certification for Cyst Reduction includes Cryptosporidium, Giardia lamblia and Entamoeba.The contaminants or other substances removed or reduced by this water treatment device are not necessarily in your water.

	OUTPUT PERFORMANCE
	Total Dissolved Solids (TDS) Reduction and System Production
	Model Number	Influent AVG µMHO		Effluent AVG µMHO		Rejection AVG%		Effluent MAX µMHO		Reject Min%		Production Rate	Recovery Rating†
	10303	774		85		89%		140		82%		15 liter/day (4gal/day)	34%
	10304	774		151		80%		200		74%		29 liter/day _{(7.6 gal/day)}	24%

	† System has been tested and operates at the specified recovery rating under standard test conditions as specified in the Performance Data Sheet. The recovery rating is a percentage measure of the amount of influent water which is delivered as permeate under open permeate discharge conditions.

	CONDITIONS FOR SYSTEMS USE MEMBRANE TYPE: CELLULOSE TRIACETATE
	Source Water Supply Profile			Chemical Parameters		Maximum MG/L		Application Guidelines
	Community/Private	Chlorinated		Hardness (CaCo₃)		<350		This drinking water system is for use on potable water supplies only. CAUTION: Do not use this system where water is microbiologically unsafe or with water of unknown quality without adequate disinfection before or after the system. Source water exceeding Chemical Parameters requires pretreatment.
	System Pressure	242-690 kPa (35-100 psig)		Iron (Fe)		<0.1
	Temperature	4°-32° (40°-90° F)		Manganese (Mn)		<0.05
	pH Range	4.0-8.0		Hydrogen Sulfide (H₂S)		0.00
	Maximum TDS Level	1500 mg/L		Residual Chlorine (Cl₂)		0.1-10.0
	Turbidity	<1.0 NTU		^{* Silt Density Index: Value stated in SDI Units.}
	Maximum SDI^* <0.1

	Warranty: PURA warrants all new products to be free from defects in material and workmanship. PURA systems are warrantied for 3 years from the date of purchase except electrical components which are warrantied for 1 year. Filters are not warrantied due to varying water conditions. This warranty agreement excludes all products or component parts that, in the opinion of PURA, have been subjected to negligent use, misuse, or alteration, or that have been repaired with component parts other than those manufactured or supplied by PURA. This warranty gives the buyer specific rights. These rights vary from state to state.

Filter Pure Systems, Inc.
5405 Boran Place
Tampa, FL 33610
Ph. 813.626.9600 * Fax. 813-626-4800
E-Mail: info@filterpure.com